English

POLYSTYRENE CUTTER

Description of device

Purpose: Cutting and finishing polystyrene foams.
Operation: The device’s transformer generates extra-low voltage, which is used to heat the resistance wire to 370 - 420˚C (depending on the ambient temperature).
Polystyrene foams melt at temperatures as low as 80˚C, allowing the cutting wire to cut the material by evaporating it, with only minimal physical contact.
This technology has a number of major benefits over traditional cutting methods (blade, saw, etc.).
A few examples: - No cutting waste is produced. It enables high-precision cutting, eliminating the problem of distortion resulting from the resistance involved in physical contact. The surface of the finished materials will be perfectly smooth, as the beads are prevented from breaking off.

More

VEHICLE COOLANT HEATER

Description of device

Purpose: Pre-heating the coolant of water-cooled vehicles.
It makes winter cold starts easy and makes it unnecessary to use any material or devices harmful to the engine (e.g. cold-start spray, flare, push starting...). The pre-heated engine starts more easily even in very cold weather (up to -25°C), saving the starter motor, the battery and the vehicle’s electric system. Engine oil cannot freeze in a pre-heated engine and it provides lubrication immediately. On the contrary, a frozen engine runs without lubrication for almost half a minute after starting, causing the most rapid and greatest wear to engines. The consumption of pre-heated engines is lower, too, as they require less additional fuel to reach operating temperature. By using the device, engine ageing is slowed down and the usability of old engines is improved. It provides a great help in starting gas-fuelled engines, as it enables pre-heating of the reductor, too. All devices are equipped with automatic temperature regulators to make their operation safe. Using the programmable time switch included, you can make its use even more convenient by heating up the car by the pre-set time. Modern diesel engines in good condition are easier to start but they are difficult to heat up and therefore heat up the passenger compartment much more slowly; however, this is different for pre-heated engines. Your day starts more easily and conveniently, like your car. Save energy, time and money! Boost your comfort, save your vehicle, yourself and your environment!

More